View SLDB101S_4808111.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere
FEATURES
* * * * * * * *
SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER
SLDB101S THRU SLDB107S
Good for automation insertion Surge overload rating - 30 amperes peak Ideal for printed circuit board Reliable low cost construction utilizing molded Glass passivated device Polarity symbols molded on body Mounting position: Any Weight: 0.33 gram
SLDBS
MECHANICAL DATA
.252 (6.4) .236 (6.0) MAX .189 (4.8)
* Epoxy: Device has UL flammability classification 94V-O
.009(0.220) .007(0.180) .0039 (0.100) .0036 (0.092) .028 (0.700) .012 (0.300)
.142 (3.6) .126 (3.2) MAX .209 (5.3)
.028 (0.7) .020 (0.5)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%.
.165 (4.2) .150 (3.8)
MAX .059 (1.5)
Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25oC unless otherwise noted) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Bridge Input Voltage Maximum DC Blocking Voltage Maximum Average Forward Output Current at T A = 40 oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range
o
SYMBOL SLDB101S SLDB102S SLDB103S SLDB104S SLDB105S SLDB106S SLDB107S VRRM VRMS VDC IO I FSM R qJA RqJL TJ,TSTG 50 35 50 100 70 100 200 140 200 400 280 400 1.0 30 62.5 25 -55 to + 150 600 420 600 800 560 800 1000 700 1000
UNITS Volts Volts Volts Amps Amps C/W
0
0
C
ELECTRICAL CHARACTERISTICS (At TA = 25 C unless otherwise noted) CHARACTERISTICS Maximum Forward Voltage Drop per Bridge Element at 1.0A DC Maximum Reverse Current at Rated DC Blocking Voltage per element @T A = 25 C @T A = 125 o C
o
SYMBOL SLDB101S SLDB102S SLDB103S SLDB104S SLDB105S SLDB106S SLDB107S VF IR 1.1 2.0 0.5
UNITS Volts uAmps mAmps 2007-08
Note: 1."Fully ROHS compliant","100% Sn plating(Pb-free). 2. Thermal Resistance: Mounted on PCB.
RATING AND CHARACTERISTICS CURVES ( SLDB101S THRU SLDB107S )
INSTANTANEOUS FORWARD CURRENT, (A) PEAK FORWARD SURGE CURRENT, (A) 30 25 20 15 10 5 0 0 2 4 6 10 20 40 60 100
8.3mS Single Half Sine-Wave JEDEC Method
10
1
0.1
T J = 25 OC Pulse Width = 300mS 1% Duty Cycle
0.01
0
0.4
0.8
1.2
1.6
2.0
NUMBER OF CYCLES AT 60Hz
INSTANTANEOUS FORWARD VOLTAGE, (V)
INSTANTANEOUS REVERSE CURRENT, (uA)
1000
FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT
AVERAGE FORWARD CURRENT, (A)
TA = 125 OC
1.5
FIG.2 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS
100
1.0
10
TA = 25 OC
0.5
1.0
60 Hz RESISTIVE OR INDUCTIVE LOAD
0.1 0
20
40
60
80
100
120
140
0 20
40
60
80
100
120
140 150
PERCENT RATED PEAK REVERSE VOLTAGE, (%)
AMBIENT TEMPERATURE, (OC)
FIG.3 TYPICAL REVERSE CHARACTERISTICS
FIG.4 TYPICAL FORWARD CURRENT DERATING CURVE
Mounting Pad Layout
.252 Max. (6.40 Max.)
.165 (4.2) .150 (3.8)
.028Min. (0.70Min.)
.028 Min. (0.70 Min.)
Dimensions in inches and (millimeters)
DISCLAIMER NOTICE
Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.

▲Up To Search▲

Price & Availability of SLDB101S

	To Download SLDB101S Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .